Finger (see it)
	A small rectangular thin wire frame covered with Bobbinet, Silk or Duvetyne for lighting control in small areas on a set. Matthews manufactures two sizes 2"x12" and 4"x14".

Flag (see it)
	A rectangular frame with a mounting pin, made of 3/8" thin wall tubing onto which Duvetyne is sewn. Flags mounted on Century Stands are used to create shadow areas on the set.

Flex Arm (see it)
	A flexible mounting arm with four or five lockable ball joints for mounting Dots, Fingers or Flex Scrims.

Flex Scrim (see it)
	Flex Scrims are available in both open end and solid and used primarily with Flex Arms. Before the Superflex, standard flags and open ends were too heavy for the available Flex Arms. Flex Scrims are made with 2 mounting pins and are available in 10"x12" and 12"x20".

Floppy (see it)
	Cutters made with an additional panel that is held in place with Velcro when not needed and released to double the size of the Cutter when needed.

French Flag (see it)
	French Flags are made out of either a firm but flexible ABS plastic and used to shade a camera lens with the help of a French Flag Arm or made of steel and used on a Flex Arm which is attached to a light fixture.

Furniture Clamp (see it)
	See Bar Clamp