Additional Information
| Part Number | Motion Control System - PN377719 |
|---|
Details
CLICK HERE FOR SLIDER MOTION CONTROL MANUAL - preliminary version only!
Developed specifically for use with the DC Slider, you'll enjoy endless possibilities of camera movement and control. Motion control allows manual and programmed movements. Every movement, manual or programmed may be stored for later use. There are nine persistent banks and one volatile bank available. Each movement can be repeated up to 999 times and extended "time extension" up to 99 times, allowing the user more than enough opportunity to get that perfect shot. When using Canon and Nikon DSLR's and the accessory camera control cable, it is possible to control the shutter speed and exposure from the remote control which contains a built-in intervalometer. You'll really appreciate the wide range of speed settings from 0-20cm/sec and a speed ramp range from .5-2.5 seconds. Due to the patent pending, precision counter balance system on the DC Slider family, only one motor is required for all functions of motion control. The Motion Control System allows the use of the multi-angled slider to achieve a wide range of unique shots. Designed and manufactured by FloatCam.
Time Lapse and Stop Motion Modules
Time Lapse Continuous:
Time Lapse Continuous mode allows for continuous movement across the slider during the time lapse process. In this mode it is possible to set the total movement time, number of shots and control the shutter and exposure of a DSLR camera. It is also possible to trigger multiple image sequences from the Motion Control. This can be useful for high dynamic range imaging, exposure-bracketed time lapse or multiple constant-exposure shots for noise reduction in the post production process. The time lapse continuous setting also gives you the option to read a saved track from the memory, or manually set the start and stop position desired.
Time Lapse After Shot:
Time Lapse After Shots or Shoot-Move-Shoot mode works similar to the continuous time lapse mode, but the camera stops before each shot. Set the distance, number of shots, movement time, and control shutter and exposure of DSLR’s. Multiple image sequences for HDR photography are also capable in this mode.
Stop Motion Distance:
Stop Motion Distance mode allows programmed distance between each shot with precise accuracy. Every move and shot is initiated manually through the controller.
Stop Motion Shots:
Stop Motion Shot mode allows camera movement with factory settings and programmed number of shots. In this mode, it is possible to set the total movement time, number of shots and control shutter and exposure of DSLR cameras with the use of the accessory camera control cords.
Accessory Camera Control Cable for DSLR’s:
PN# 377721 Canon(C6) EOS 30/33/50/C300/300/300D/(Digital Rebel)/350 D (XT)/400 D (Xti)/ 450 D (XSi)/1000D (XS)/500D (T1i)/550D (T2i)/60D
PN# 377722 Canon(C8) EOS 10D/20D/30D/40D/50D/5D Mark II/7D/1D/1Ds MarkI-IV
PN# 377723 Nikon(N8) N90s/F5/F6/F100/F90X/D1/D1H/D1X/D2/D3/D2Hs/D2X/D2Xs/D200/D300/D700
PN# 377724 Nikon(N10) D90/D5000/D7000/D3100