January 21, 2016
For Immediate Release
Burbank, CA. Matthews Studio Equipment has recently joined forces to produce dolly grip James Saldutti’s DUTTI DOLLY at their Burbank facility. “While there are many different kinds of dolly configurations on the market, James has come up with a unique approach that fills a need in today’s fast-paced market,” says Robert Kulesh, Vice President of Sales and Marketing at MSE. “Not only can it help crews multi-task, it is also light enough to move quickly and works low enough to get into places many other dollies can’t.”
When Saldutti was working with James Muro, he became aware of the cinematographer’s desire to shoot many low shots. “The dollies out there rest too high on track,” explains Saldutti. “To make shots work for James [Muro], I had to get lower – so I came up with a configuration that I thought might just work for one film. Who knew that would become his go-to piece of equipment on every project he does.” Saldutti’s solution not only got Muro (and now many shooters on every form of production) lower – it also is configured so that it can be carried much easier, saving a grip’s back – and costly time from break down and set up.
Muro loves it. “I’ll put the Dutti Dolly on top of the table in the White House situation room for HBO’s The Brink,” he says. “It sits on track on the floor for a self-motivated situation with a one foot or two foot riser. It can, obviously, fit in much tighter space than a conventional dolly. It simply makes for an intuitive operating experience, where there is not a lot of discussion not a lot of laying track, not a lot of big equipment. With the Dutti Dolly I can be in and out of the location quickly and still have a massive amount of production value, just as if I had all the big gear.
“On the television series, Southland, we were always trying to have smaller simple solutions to get the camera crew in and out of the locations within two to three hours,” he adds. “A couple of 12 foot planks and the Dutti Dolly and various sized sliders are pretty much all we needed. The dolly ended up being the staple of the camera movement on that show.”
Another big fan is cinematographer Joaquin Sedillo ASC. “While shooting Glee sequences on stage at McKinley High Auditorium set, rather than taking time to remove one or several rows of auditorium seats, I simply used the James Saldutti’s set up,” he says. “We could easily throw down a 16-foot plank and a couple of ‘A-frame’ lengths of simple track and his light-weight but solid Dutti Dolly on the arm rests of the seats – and we could pull off a tracking shot in record time!
“The same thing with low angle shots on the edge of our auditorium stage,” he adds. “It saved us valuable time in a frequent scenario where, rather than hoisting one or more of our regular dollies form the stage ‘pit’ onto the stage with chain motors, we’d throw down Dutti’s light-weight track and dolly. It was a HUGE time savings plus a great ease of execution.”
“James has managed to pack a whole lot of punch in a small, light, stable and efficient dolly,” adds Kulesh. “It can get into extreme low angles or can carry a bazooka or tripod for other heights. The stability gives the operator the ability to whip pan and quick tilt. It rolls directly on the ground or can be mounted on stands or track and can be over or under slung. It can fit in places where conventional dollies cannot fit – airplane or bus aisles or even church pews. Dutti Dolly is great for long takes, stunts or poor man’s process and more.”
For further information on the wide-range of Dutti Dolly capabilities please CLICK HERE
MSE is a 45-year-old manufacturer of industry-specialized hardware, camera and lighting support. Its equipment is being used on entertainment productions and in major studios in over 90 countries around the world. The company has been honored with the Presidential “E” Award for outstanding contributions to growing U.S. exports, strengthening the economy and creating American jobs. Matthews has been honored by the Academy of Motion Picture Arts and Sciences and the Academy of Television Arts and Sciences for Technical Achievement. MSE offices are located at their state-of-the-art manufacturing facility at 4520 West Valerio Street, Burbank, CA 91505. www.msegrip.com.
For more information and additional photos at higher resolution please contact:
Robert Kulesh, VP Sales and Marketing MSE