BURBANK, Calif., Aug. 3, 2026 — Matthews Studio Equipment has released the Monitor Stand III, a rolling monitor station that carries up to 70 lb / 32 kg, rides on an ultra-low 5.5″ base, and is built entirely with nuts and bolts so it can be serviced with factory parts rather than replaced. The Monitor Stand III (SKU 249574) lists for $649 and is shipping now.
Built Like Grip Gear. Because It Is.
The Monitor Stand III is the evolution of the industry-standard rolling monitor stand — from a simple riser to a fully rigged rolling station, built for the studio floor and ready for the location that fights back.
All nuts-and-bolts construction, a black forge-texture finish, and Matthews factory parts throughout mean the Monitor Stand III is fully serviceable for a career of set days, not a season. Replacement parts are available from the company’s Burbank, California factory.
Monitor Stand III Specifications
| Specification | Measurement |
|---|---|
| Load capacity | 70 lb / 32 kg |
| Minimum loading height | 31″ / 78 cm |
| Maximum loading height | 69″ / 175 cm |
| Base height | 5.5″ / 14 cm |
| Stand weight | 20 lb / 9 kg |
| Accessory thread | 1/4″-20 tapped baby pin |
| Finish | Black forge-texture |
| Construction | All nuts-and-bolts; fully serviceable with Matthews factory parts |
| Leveling | Rocky Mountain leveling leg included |
| SKU | 249574 |
| Price | $649 USD |
Key Features
- Straight-tracking, dual-locking casters: Glide across the set, then lock with V-shaped brakes that engage at three points of contact so the stand stays exactly where you put it.
- Ultra-low 5.5″ base: Rolls under set furniture, dollies and video carts instead of around them.
- Integrated carry handle: carry handle for moves between setups.
- Black forge-texture finish: A tough surface that hides set wear and resists chipping.
- 1/4″-20 tapped baby pin: Up top for monitors, mounts, flags and accessories.
- Rocky Mountain leveling leg: Included, for uneven ground and location work.
- All nuts-and-bolts construction: Every part is replaceable with factory components from Burbank.
What’s New in the Monitor Stand III Compared to the Monitor Stand II
The Monitor Stand III keeps the 70 lb / 32 kg load capacity and the rolling, height-adjustable format crews already know, and changes how the stand is built and how it moves:
- Serviceable. The Monitor Stand III is assembled entirely with nuts and bolts, so a damaged component is replaced rather than the whole stand being retired.
- Caster system. Straight-tracking, dual-locking casters.
- New finish. Black forge-texture in place of the previous black chrome.
- Integrated carry handle. The carry handle allows easy transport from set to set.
- Ultra-low 5.5″ base. Built to roll under carts and set furniture.
- Tapped accessory pin. A 1/4″-20 tapped baby pin adds a mounting point for flags and accessories.
- Leveling leg included. The Rocky Mountain leveling leg goes with the stand.
Optional Add-Ons: Battery Tray and Monitor Mount
Two factory add-ons take the Monitor Stand III from riser to fully rigged video village — power at the base, monitor up top.
Battery Tray (SKU 861837) — $99
- Bolt-on aluminum construction in matching forge-texture black
- Mounts the battery low for a stable center of gravity
- Tie-down slots along both sides for strapping power
- Frees riser space for monitors and equipment
- Also available as Battery Tray with Jr Pin (SKU 861836)
Monitor Mount (SKU 861862) — $265
- CNC-machined from 6061-T6 aluminum billet
- Supports monitors up to 65 lb / 30 kg
- VESA pattern, with a 200 mm adapter plate available (PN 861863)
- Dual 5/8″ baby pin mounts for 90° angle changes
- Folds flat for transport
Who Should Use the Monitor Stand III
- DITs and video village operators building monitor carts
- Grip and electric departments
- Cinematographers and camera operators working off a director’s monitor
- Script supervisors and directors on set
- Rental houses and production companies maintaining long-term inventory
- Location crews working on uneven ground
- Broadcast, live event and corporate video teams
Why Choose the Monitor Stand III?
- It gets repaired, not replaced. Nuts-and-bolts construction plus factory parts from Burbank means a long service life on a rental shelf.
- It stays put. Three-point-contact V-brakes lock the stand where you set it, with a monitor loaded.
- It fits where other stands don’t. A 5.5″ base rolls under carts, dollies and set furniture.
- It moves in one hand. The integrated carry handle is built for fast turnarounds.
- It levels on bad ground. The included Rocky Mountain leg handles slopes and location surfaces.
- It scales. Add the battery tray and monitor mount to build a complete video village station.
Frequently Asked Questions
How much weight can the Matthews Monitor Stand III hold?
The Monitor Stand III has a load capacity of 70 lb / 32 kg.
How tall does the Monitor Stand III go?
The Monitor Stand III has a minimum loading height of 31″ / 78 cm and a maximum loading height of 69″ / 175 cm. The base height is 5.5″ / 14 cm.
How much does the Monitor Stand III weigh?
The stand itself weighs 20 lb / 9 kg.
What is the difference between the Monitor Stand III and the Monitor Stand II?
The Monitor Stand III (also written Monitor Stand 3) is built entirely with nuts and bolts so it can be serviced with factory parts, with straight-tracking dual-locking casters with three-point-contact V-brakes, a black forge-texture finish, reinforced stamped ‘M’ braces, an integrated carry handle, an ultra-low 5.5″ base, a 1/4″-20 tapped baby pin for accessories, and an included Rocky Mountain leveling leg. Both stands carry up to 70 lb / 32 kg.
Does the Monitor Stand III come with a monitor mount?
No. The Monitor Stand III includes a Rocky Mountain leveling leg and a 1/4″-20 tapped baby pin. The Monitor Mount (SKU 861862, $265) is a separate factory add-on, as is the Battery Tray (SKU 861837, $99).
What size monitor can the Monitor Stand III hold?
With the optional Monitor Mount (SKU 861862), the stand supports monitors up to 65 lb / 30 kg on a VESA pattern, with a 200 mm adapter plate available separately (PN 861863). The stand’s overall load capacity is 70 lb / 32 kg.
Can the Monitor Stand III be used on uneven ground?
Yes. A Rocky Mountain leveling leg is included for uneven ground and location work.
Are replacement parts available for the Monitor Stand III?
Yes. The Monitor Stand III is constructed entirely with nuts and bolts and is fully serviceable, with replacement parts available from the Matthews factory in Burbank, California.
How much does the Matthews Monitor Stand III cost and where can I buy it?
The Monitor Stand III lists for $649 (SKU 249574) and is in stock and shipping now at msegrip.com, with free shipping in the continental USA, and through authorized Matthews dealers worldwide.
Pricing and Availability
The Matthews Monitor Stand III (SKU 249574) lists for $649 and is in stock and shipping now at msegrip.com, with free shipping in the continental USA, and through authorized Matthews dealers worldwide. The Battery Tray (SKU 861837) is $99 and the Monitor Mount (SKU 861862) is $265.
Read the Article On
About Matthews Studio Equipment
Matthews Studio Equipment has manufactured professional grip equipment in Burbank, California since 1968. The company helped establish the industry standards for the 5/8″ baby pin and 1-1/8″ junior receiver still used on sets worldwide, and has received three Scientific and Technical Awards from the Academy of Motion Picture Arts and Sciences. Its catalog spans more than 2,000 products, including stands, clamps and hardware, camera support, booms and arms, dollies and track systems, and lighting control.
Matthews empowers creators with innovative grip equipment that promotes efficiency and safety. We are committed to delivering reliability, quality, and education for all.
